FR fabric Volcano updates EN ISO 11612 to version: 2015

August 2019, AITEX lab (Spain) has tested Volcano fr fabric to the new version of safety standard for Protective clothing – Clothing to protect against heat and flame. Volcano confirmed its compliance to ISO EN 11612:2015 and received a new certificate, which you can see below.

Super multi-functional Flame Retardant fabric with Antistatic properties. Volcano is made of 87% cotton/ 12% nylon, 1% Antistatic, weight 260gsm and best used for protective clothing. Certified by EN ISO 11611, 11612, EN 1149, EN 13034. It is an excellent choice for FR-clothing of oil and gas companies, operating in a warm or hot climate. Due to elegant and smooth satin weave, protective clothing made of Volcano fabric looks impeccable on rig chiefs of offshore platforms as well as on manager staff in the office of petroleum company.

According to EN ISO 11612:2015, Volcano has been successfully tested to the following tests:

  1. Heat Resistance (ISO 17493:2016) – performance level – PASS

    Volcano results for samples and after 5 washing cycles at 60ºC, according to the standard ISO 6330:2012, method 6N, F drying (tumble dry)

Test

Flame

Melting

Shrinking

Result

No

No

Warp -0,5%
Weft -0,4%

RequirementNo layer can igniteNo layer
can melt 
No layer shrinks more than 5%

 

  1. Limited Flame Spread (ISO 15025:2016, Method A) – performance level  A1

    Volcano results for new samples and after 5 washes @60ºC ISO 6330:2012, method 6N, F drying (tumble dry)

  • Flaming to top or either side edge: No – PASS
  • Hole formation: No – PASS
  • Loose waste: No – PASS
  • After flame time (s): No – PASS
  • Afterglow time (s): No – PASS

 

  1. Limited Flame Spread (ISO 15025:2016, Method B) – performance level  A2

    Volcano results for new samples and after 5 washes @60ºC ISO 6330:2012, method 6N, F drying (tumble dry)

  • Flaming to top or either side edge: No – PASS
  • Hole formation: No – PASS
  • Loose waste: No – PASS
  • After flame time (s): No – PASS
  • Afterglow time (s): No – PASS

 

  1. Determination of Dimensional Change in Domestic Washing and Drying (ISO 5077:2008) – performance level PASS
    In accordance with the Standard EN ISO 11612:2015, the dimensional change shall not exceed ±3%

    Volcano results for new samples and after 5 washes @60ºC ISO 6330:2012, method 6N, F drying (tumble dry)

  • Warp: -1,0 – PASS
  • Weft: +1,0 – PASS
  1. Fabric Tensile Strength and Rupture Elongation (EN ISO 13934-1:2013) – performance level  PASS
  • Wrap: 860N PASS (must resist ≥ 300 N)
  • Weft: 670N PASS (must resist ≥ 300 N)

 

  1. Determining Heat Transmission on Exposure to Flame (ISO 9151:2016)  performance level B1
  • Average value for HTIa24 (s): 4,6 

Performance 
level

Range of HTIa24 
values (s)

 

Minimum Maximum

B1

4,0 < 10,0

B2

10,0 < 20,0

B3

20,0

a: Heat transfer index, as defined in ISO 9151.

 

  1. Radiant Heat (ISO 6942)  performance level C1
  • Average value for RHTI 24 (s): 12,8

Performance 
level

Range of HTIa24 
values (s)

 

Minimum Maximum

C1

7,0 < 20,0

C2

 20,0 < 50,0

C3

 50,0 < 95,0

C4

 95,0

ª: Heat transfer index, as defined in ISO 6942

 

  1. Assessment of Resistance of materials to Molten metal splash (EN ISO 9185:2007) – performance level E3
  • Average value Molten iron (g): > 203
Performance levelMolten iron (g)
 Min.Max.
E160< 120
E2120< 200
E3200 

 

  1. Contact Heat (ISO 12127-1:2015)  – performance level F1
  • Average threshold time (S): 7,9

ISO 12127-1:2007 specifies a test method for the determination of contact heat transmission. It is applicable to protective clothing (including hand protectors) and its constituent materials intended to protect against high contact temperatures. ISO 12127-1:2007 is restricted to contact temperatures between 100°C and 500°C.

Performance 
level

Threshold time (s)

Minimum

Maximum

F1

5,0

< 10,0

F2

10,0

< 15,0

F3

15,0

 

The performance requirements set out in ISO 11612:2015 are applicable to garments which could be worn for a wide range of end uses, where there is a need for clothing with limited flame spread properties and where the user can be exposed to radiant or convective or contact heat or to molten metal splashes.

Volcano  is a light flame retardant fabric with classic twill weave, developed specially for light flame retardant clothing. Volcano protective fabric is recommended for use as a middle layer of FR-clothing, like shirts, vests, light pants, or even light overalls for hot climate. 

You can find all the certificates and additional information on the product page.

 

[foogallery id=”6253″]
Scroll to Top