Poseidon-300 certified to EN ISO 11612 & EN 11611 after 50 Industrial Washes!

August 2020, AITEX lab (Spain) has tested Poseidon-300 flame-resistant fabric to the new version of the safety standard for Protective clothing for use in welding and allied processes. Poseidon-300 certified to EN ISO11612.

According to EN ISO 11612:2015, Poseidon-300 has been successfully tested to the following tests:

  1. Heat Resistance (ISO 17493:2016) – performance level – PASS

Poseidon-300 results for samples and after 5 washing cycles at 60ºC, according to the standard ISO 6330:2012, method 6N, F drying (tumble dry)

TestFlameMeltingShrinking
ResultNoNoWarp 0,8%
Weft 0,4%
 RequirementNo layer сan igniteNo layer can meltNo layer shrinks
more than 5%

 

  1. Limited Flame Spread (ISO 15025:2016, Method A) – performance level – A1

Poseidon-300 results for new samples and after 50 washings at 75ºC according to EN ISO 15797:2018, method 6N, F drying (tumble dry)

  • Flaming to top or either side edge:  PASS
  • Hole formation:  PASS
  • Loose waste:  PASS
  • After flame time (s):  PASS
  • Afterglow time (s):  PASS

 

  1. Determination of Dimensional Change in Industrial Washing and Drying (ISO 5077:2008) – performance level – PASS
    In accordance with the Standard EN ISO 11612:2015, the dimensional change shall not exceed ±3%

Poseidon-300 results for new samples and after 5 washings at 75ºC according to EN ISO 15797:2018, method 6N, F drying (tumble dry)

  • Warp: -2,0 – PASS
  • Weft: 0 – PASS
  1. Determination of Breaking Strength and Elongation (EN ISO 13934-1:2013) – performance level – PASS
  • Warp: 1400N – PASS (must resist ≥ 300 N)
  • Weft: 720N – PASS (must resist ≥ 300 N)

 

  1. Determination of Tear Resistance (EN ISO 13937-2:2000) – performance level – PASS
  • Warp 21NPASS (must be ≥ 10N)
  • Weft 17NPASS (must be ≥ 10N)

 

  1. Determining of Heat Transmission on Exposure to Flame (ISO 9151:2016) – performance level – B1
  • Average value for HTIa24 (s): 3,2 
 Performance 
level
Range of HTIa24 
values (s)
  Minimum Maximum 
B14,0 < 10,0
B210,0 < 20,0
B320,0

a: Heat transfer index, as defined in ISO 9151.

 

  1. Radiant Heat (ISO 6942:2002, Method B)  – performance level – C1
    Radiant Heat (ISO 6942:2002, Method B)  – performance level – Class 1
  • Average value for RHTI 24 (s): 15,1
Performance 
level
Range of HTIa24 
values (s)
 Minimum Maximum
C17,0 < 20,0
C2 20,0 < 50,0
C3 50,0 < 95,0
C4 95,0

ª: Heat transfer index, as defined in ISO 6942

 

  1. Assessment of Resistance of materials to Molten metal splash (ISO 9185:2007) – performance level – E3 

 

  • Average value Molten iron (g): > 204

 

 Performance level  Molten iron (g) 
 Min.Max.
E160< 120
E2120< 200
E3200 

 

 

  1. Contact Heat (ISO 12127-1:2015) – performance level – F1
  • Average Threshold time (s): 7.9

 

Performance levelsThreshold time (s)
F1Minimum  Max.

5,00    < 10,0

F210,0 <15,0
F315,0

 

 

  1. Small Molten Metal Splashes (ISO 9150:1988) – Class 1 – PASS
  • Average № of drops: 20

 

Class 1Minimum 15 drops
Class 2Minimum 25 drops

 

 

  1. Vertical Resistance (EN 1149-2:1997) – PASS
  • Average Resistance (Ohm): 3,66 ·106

 

The performance requirements set out in ISO 11612:2015 are applicable to garments which could be worn for a wide range of end uses, where there is a need for clothing with limited flame spread properties and where the user can be exposed to radiant or convective or contact heat or to molten metal splashes.

Poseidon 300 is a high-quality poly-cotton fabric with a high content of cotton, improved by the addition of polyester and antistatic yarn. It is developed for workers of Oil and Gas industries and it suits well both for rig-chiefs jackets and trousers and for oil-pipeline workers uniforms.

You can find all the certificates and additional information on the Poseidon-300 product page.

 

[foogallery id=”7169″]

 

Scroll to Top